ITSystemAdmin.com

System Administrator

In SSl Error 61 error you may get different issuer name in place of “Symantec Class 3 Secure Server CA”, still this same fix apply for this error.

Root cause of this error is client system on which this error is occurred is using old Citrix client like Citrix 10.2 or Citrix 10.X version

To Fix this problem, Install latest version of Citrix client ( also called as Citrix Receiver or Citrix ICA client )

Download Link

https://www.citrix.com/downloads/citrix-receiver/windows.html

At the time of writing this article current version of Citrix client for windows is Receiver for Windows 4.4.100 Compatible with Windows 10, 8.1, 8, 7, Vista, 2008, 2008R2, Thin PC as well as Windows Server 2012 and 2012R2.

Also Refer Citrix Article

*** Updated fix for Windows 10 Operating System error *** Secure VPN Connection terminated locally by the Client. Reason 433: Reason not specified by peer

While installing Cisco VPN client you may get an error saying Error 27850 Unable to Manage Networking Component Operating system Corruption may be preventing installation. Continue reading “Error 27850 Unable to Manage Networking Component While Installing Cisco VPN Client [FIX]”

In this article we will see the fix for error which comes while joining a windows system ( windows7 Windows8 WindowsXP ) to domain

Note: This fix will work only if you are able to ping your domain and you get authentication prompt asking for user and password while joining to domain, you get this error after giving username and password in the authentication box.

Fix:

1- Go to Control Panel>Network and Sharing Center>Change Adapter Settings 2- Right Click Local Area Connections> Properties 3- You should see Client for Microsoft Networks items in the list as shown below, if its unchecked, then check mark it and close and restart your system , and try to Join the system to domain again, it will work fine.

4- If you are not able to see Client for Microsoft Networks item in the list, then you have to install this item manually

5- Click Install> Select Client from the options available> then select Client for Microsoft Networks and click Ok

6- Now, Client for Microsoft Networks service will appear in the list, Select OK and restart the System 7- Try now to join the system to Domain, it should work fine.

If you have any comments and suggestions for this post, fell free to mention it in the comments section below

In Windows 8/8.1 (32/64 bit ) you may get an error when trying to connect to VPN from Cisco VPN Client saying Reason 442 Failed to Enable Virtual Adapter , to fix this error please make the required changes in the registry as shown in this fix it article Cisco VPN Client Error: Secure VPN Connection terminated locally by the Client Reason 442 Failed to Enable Virtual Adapter

Steps to Fix the Problem

1, Launch registry editor, from run box ( press Windows Key + R Key on keyboard to launch run box ) in run type regedit to launch registry editor

2, Navigate to this key in regitry editor HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CVirtA

3, Now on the right side pane, right click DisplayName and select Modify from the options.

4, Now based on operating system you are using, edit the value data accordingly

Windows 8 32bit (x86) Change the value data from @oem5.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter to Cisco Systems VPN Adapter

Windows 8 64bit (x64) Change the value data from @oem5.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter for 64-bit Windows to Cisco Systems VPN Adapter for 64-bit Windows

5, To make it easier to understand, let me add this foot note we are only removing this value from value data @oemX.inf,%CVirtA_Desc%; and the new value data should only contain Cisco Systems VPN Adapter for 64-bit Windows or Cisco Systems VPN Adapter ( if its 32 bit operating system )

ALSO READ THIS RELATED Cisco VPN Client Installation Error ( FIX )

Error 27850 Unable to Manage Networking Component While Installing Cisco VPN Client [FIX]

You can also ask a question on Official Cisco Support Forum for any errors related to Cisco products

Cisco Support Forum Link

Please drop your comments, if this method has fixed your problem, if you are facing any similar error please feel free to ask it under comments sections.

Here is Step by Step guide ( with Screenshots ) to fix this problem, See the error screenshot below. As per Official Cisco Support page, ICS is not compatible with AnyConnect, therefore we have to disable it, Cisco FAQ Link Q. Does AnyConnect support Internet Connection Sharing (ICS)? A. Internet Connection Sharing (ICS) is not compatible with AnyConnect. You must disable ICS for proper AnyConnect functionality.

When you try to launch AnyConnect on a PC on which ICS is already running, AnyConnect returns this error message:

The vpn client agent was unable to create interprocess communication depot.

In order to resolve this issue, disable the ICS and launch again AnyConnect.

Step 1: Click the Start button ( Windows Button ) and Click on Control Panel .

Step 2: Click on View Network Status and Tasks .

Step 3: Click on Change Adapter Settings .

Step 4: Right-click the shared connection and choose Properties

Step 5: Click the Sharing tab, Clear the Allow other network users to connect through this computer’s Internet connection checkbox

Step 6: Click OK, and retry Installing Cisco Any Connect

While installing Kaspersky Endpoint Security one of the error which we may encounter is mentioned below, in this article we will see the method to fix this problem and install Kaspersky successfully without any problem

ERROR :

Kaspersky Endpoint Security 10 for windows setup cannot be performed because a third party application is already installed on the computer: Kaspersky CheckPoint VPN client Driver . To Install Kaspersky Endpoint Security 10 for WIndows on this computer, please remove third party application by using the standard Microsoft tools or by other means

Attention some Software on your computer is incompatible with Kaspersky Endpoint Security 10 for Windows. To Proceed with the installation, remove these applications Kaspersky CheckPoint VPN Client Driver.

1- Remove any Software related to Check Point or Check Point VPN

2- After Removal, launch registry editor from Start>run>Regedit.msc ( Windows Key + R, to launch Run Box )

3- Delete the below key and then restart the System and try, It should work Fine.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vsdatant

You may also refer the article on Kaspersky support portal which explain, Kaspersky Endpoint Security 10 for Windows (for workstations).Known limitation: partial incompatibility between Kaspersky Endpoint Security 10 and CheckPoint VPN client R75

Link to the Article

If you try to connect ( remotely via rdp client) to a system running operating system which only allows connection from NLA enabled system then you may get an below error, generally this happens when you try to remote from XP client to (say) Windows 7 system on which NLA is enabled

Error: The remote computer requires Network Level Authentication which your system does not support.

To enable Network Level Authentication On Windows XP Service Pack 3 do the below changes in registry

1- Click Start, click Run, type regedit, and then press ENTER. 2-Registry editor will be launched, there navigate and locate Lsa key as shown below

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa

3- In right side pane, right-click Security Packages, and then click Modify. 4- In the Value data box, type tspkg as shown in screenshot below, do not make changes for existing data and then press Ok

Now Navigate to another Key as instructed below

1- In Registry Editor Navigate and Locate SecurityProviders key as per below instructions

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders 2- In the right hand pane, right-click SecurityProviders, and then click Modify.

3- In the Value data box, type credssp.dll as shown in screenshot below, do not make changes for existing data and then press Ok

4 – Exit the Registry editor 5- Restart the computer for changed to take effect

While installing CutePDF, you may get an error saying ” Error 126 Install Printer Driver failed CutePDF ” on system running Windows XP, Continue the installation of CutePDF normally, Press ” ok ” and ignore this error. We can Install the Printer Driver later after installation is completed.

Before trying below steps, Download and install the latest version of CutePDF from this link ignore the error as said earlier.

To Install The Printer Driver Manually follow the these steps:

1) Go to Control Panel>Printers and Faxes>Add a Printer>Select Add a local printer. 2) In use the following port drop down options, select “CPW2: (CutePDF Writer)” and click Next.

3) At driver selection prompt select Have Disk>Browse and select any Postscript printer and click Next

In this Example we are selecting HP Color LaserJet PS

4) Now change the Printer name to CutePDF Writer and click Next>Finish.

While Working on Excel I observed Fill handle not working as expected, I was trying to fill adjacent cells with a series of data which can be done when you drag the fill handle but there was no + option (as shown in below image) visible near the fill handle to drag it. Continue reading “Fill Handle Not Working in MS Office Excel 2010 and 2007”

When Opening any Hyperlink in Outlook Email you may be presented with an Error Message as stated below.

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. Your organization’s policies are preventing us from completing this action for you. For more info, please contact your help desk.

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

Your organization’s policies are preventing us from completing this action for you. For more info, please contact your help desk.

Microsoft have already released a Fix it for this problem. Please visit the below URL and download the Fix It and run it after that Restart the system and the Problem will be fixed

http://support.microsoft.com/kb/310049